Zento 24V DC Car Park Boom Barrier Gate for Property Management with Four Operation Control Modes

Zento 24V DC Car Park Boom Barrier Gate for Property Management with Four Operation Control Modes

ZT-01 is a high-performance smart boom gate. It has maximum compatibility and can be used with the full range of booms. It is the first choice for property management.

The boom barrier gate available in different colors, support customization. The high level of integration makes it look minimalist but more powerful than others.

Four Operation Control Modes: The boom gates can be flexibly controlled by four ways: loop detector, parking management software, infrared controller and manual control.

High-strength carbon steel splicing frame and a new spraying process ensure the solid body. The barrier gate has comprehensive anti-crushing protection: infrared anti-crushing, radar anti-crushing, and anti-crushing loop detector.

Digital control technology guarantees safe operation throughout the process. The powerful motor ensures a long service life of at least 3 million operations.

The need of Boom Barrier Gates:
Coming to the point of safety of people/premises which an automatic boom barrier surely ensures. Good thing with boom barrier is this could be first line of defense for the security, a security personnel can perform inspection for every vehicle. Usually places like areas with heavy traffic flow and it becomes difficult to manage the traffic manually. LEAPTOR offers seamless and easy parking management systems articulated boom barriers that reduce congestion/traffic, increase revenue and improve overall output of the parking program.

Working
Boom Barriers are made up of a barrier arm which is pivoted at the fixed point. It has an AC motor, gearbox, locking plunger and a balancing spring. The AC motor is strong and powerful to lift up the installed barrier arm, it moves in the vertical direction. By giving power supply to the motor, the motor rotates the gearbox which in turn moves the counterbalance channels from horizontal to vertical positions & vice versa.

The gearbox is heat-radiating with high carrying ability. The balancing spring holds the barrier arm from not falling low. The locking plunger enters the locking device smoothly and freely. The boom barriers range from 2m – 6m, the operating temperature ranges from -20 to+ 80°C, this allows to use them in different climatic zones and the operating voltage ranges from 110 to 220 V. Various types of boom barriers like, Straight arm, folding arm, Fence arm and advertising type are available.

LED indicators makes easy to know the movement direction & working of the barrier.

Benefits of Boom Gates:
Boom barriers are reliable, improve security and control the flow of traffic, provide instant privacy from entering of unauthorized persons. They are very durable and made to last. They’re also built to withstand a fair amount of wear and tear, and are low maintenance and efficient in utilizing space.

Thanks to the obstacle detection system which makes barrier to move upwards if any obstacle is detected.

Automation zone provides boom barriers with latest trending technologies like LED boom barrier, RFID boom barrier and also improves the lot more with all the features.

Common faults of the boom barrier and their maintenance methods are as follows:

1. The buried wire of the boom barrier coil is loose: When the loope dtector coil cannot be firmly fixed in the nest, the vibration of the car passing over the road surface will cause the coil in the nest to deform and change the initial inductance of the loop detector. At this time, the sensor must be reset before it can work normally. The solution is to pour the melted asphalt inside to fix it.

2. The movable screw of the boom barrier is loose: The movable screw is connected with positive and negative threads, and the upper and lower bearings are connected with double-headed screws. If the screw is loose, it will cause inaccurate upper and lower positions. Use an 80MM long Ф4 iron rod to insert between the double-headed screws and rotate to adjust the gate rod up and down.

3. The arm screw of the boom barrier is loose: If this screw is loose, it will cause the upper and lower positions of the barrier rod to be inaccurate and shake more when the rod is stopped. Just tighten the bolt and lock the nut.

4. The magnet in place is moved: The upper and lower positions are both in place with Cimin Hall elements. If the position of the rectangular magnet and the disc with cam of the reducer changes, it will cause inaccurate position. Adjust it accurately and do not flip it over to solve the problem.

5. Power-off protection switch power off: When the control part of the gate fails, the automatic protection device of the gate will work automatically. At this time, the gate rod stops at the inclined upper position and does not move. The main power is disconnected and the machine does not work. At this time, open the machine door and rotate the large belt clockwise for 3-8 turns to the upper position to restore it. If it cannot be restored to its original state after so many times, it is necessary to check whether the Hall element and circuit board are malfunctioning.

6. The lower pull hook adjustment nut is loose: There is a lower pull hook with M10 thread at the bottom of the chassis. Its function is to pull the spring of the balancing mechanism and the zero point adjustment of the balancing function. It is equipped with two M10 hexagonal nuts and Ф10 spring washers. If this nut is loose, knocking sound and imbalance will occur when the machine is running. Although the machine can still run after imbalance, it will greatly increase the load of the reducer, motor and other transmission parts, thereby affecting the reliability and mechanical life of the gate operation.