How to carry out daily maintenance and maintenance of the swing gate? As a highly active access gate, the swing gate also requires daily maintenance and maintenance. In particular, the movement of the swing gate needs to be dripped with lubricating oil to ensure the good use of the machine.
Precautions and daily maintenance of swing gate:
When the turnstile is in the closed state, do not hit the door panel, which will cause the door panel of the turnstile to wear out, and damage other accessories, which will affect the service life. 2. Regularly check whether the door panel of the gate is damaged, and deal with it in time if there is any damage.
3. When the main machine, auxiliary machine or chassis is opened for maintenance, be sure to turn off the power connected to the machine. 4.
It is strictly forbidden to plug and unplug the port connection socket with power on. Hot plugging can easily damage the control circuit. 5.
Regularly check whether the fixing screws between the gate panel, the motor and the rotating arm are loose. If they are loose, they should be tightened in time. It is recommended to check once a week.
6. After swiping the card, the gate turns on one side and does not open on the other. If this problem occurs, there is a problem with the proximity switch on the non-action side.
Please check the proximity switch. The inspection methods are as follows: 1. When the proximity switch senses the arm, is the light behind the proximity switch on? 2.
When the light behind the proximity switch is on, check whether there is a signal output to the control board. 3) How far is the distance from the proximity switch to the arm, the general standard is 0.1mm to 0.